Freewing Pandora 4-in-1 Blue 1400mm (55") Wingspan - PNP
- Regular price
- €22900 (VAT inc.)
- Sale price
- €22900
- Regular price
- €000
- (Save €-229.00)
- Unit price
- /per
-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
Overview
Freewing Pandora 4-in-1 Blue 1400mm (55") Wingspan - PNP - FT30111P
The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sport low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear which the Motion RC Pilots think looks best on the low wing plane, and there is a set of "Big Wheel" landing gear in tail dragger format which is perfect for grass and dirt takeoff/landing. The "Big Wheels" even work on tall thick grass with ease.
You literally have 4 combinations and can make 4 different planes. This is a fantastic concept which is very enjoyable to fly. The Pandora does not get knocked around by the wind as much as a smaller plane. Though it is recommended beginners do not fly in a lot of wind, this plane is easier than most to fly in a bit of wind because of the larger size and weight. The guys at Motion RC think the Freewing Pandora may quickly become the plane of choice for both beginner and intermediate pilots. This is one of the best performing, best built, best values in RC planes.
Visit the Official Freewing 1400mm Pandora 4-in-1 Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- High wing and low wing configuration included in one plane
- Tricycle landing gear and tail dragger landing gear included
- Included BIG wheels for tall grass takeoff and landings
- Molded wing pocket for optional flap servos - push rods and linkage included
- Durable EPO foam construction
- Nylon hinges on all control surfaces
- Brushless motor, ESC, and 4 micro servos installed
Requires:
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- 3 Cell 11.1V 2200 mAh Lipo Battery with XT60 Connector - EPR22003X6
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
Product Specifications:
Wingspan |
1400mm/55.1in |
Length |
1180mm/46.5in |
Flying Weight |
1500g / 53 ounces |
Power System |
Brushless 3536-800Kv |
Speed Control |
30A, Internal BEC, XT60 connector |
Propeller / EDF |
11x6 3 blade prop |
Servos |
|
Landing Gear |
Fixed tricycle or tail dragger. Small or large wheels |
Required Battery |
11.1V 2200mAh 25C 3 cell LiPo with XT60 connector |
Required Radio |
4 Channel |
Rudder |
Yes |
Flaps |
Optional - MD31091R-300 and MD31091-300 |
Ailerons |
Yes |
Lights |
No |
Hinge Type |
Nylon hinges on all control surfaces |
Material |
EPO Foam |
Videos
Product Videos
Spare Parts
Product Spare Parts
1 - 32 of 43 results
Upgrades
Product Upgrades
1 - 9 of 9 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Thank you for posting a question!
Your question will appear on the site once we've answered it.
Support
Product support
Product Manuals:
Product Updates:
- May 6, 2013 - Optional flaps are molded into the wings along with a pocket for the flap servos. Better yet, the hardware for the optional flaps is included. You only need two 9 gram servos to make the flaps fully operational in about 10 minutes. If you use one flap channel, you will need a Y cable, one forward 9g servo, and one reverse 9g servo. If you use two channels for flaps, you can use two forward 9g servos and reverse one channel using your radio. If you need any help picking out servos for the flaps, the guys at Motion RC are happy to help.
If you need any additional assistance, please visit the Motion RC Help Center
BenchCraft 300mm (12") Charge Lead with XT60 Connector
SKU: BCT5002-008
VIEW PRODUCT


SkyRC B6AC V2 50W 6 Cell (6S) AC/DC LiPo Battery Charger
SKU: SK-100008-01
VIEW PRODUCT


Futaba 6K-V3S 8-Channel Transmitter with R3008SB Receiver
SKU: FUTK6100
VIEW PRODUCT


Freewing 9g Digital Reverse Servo with 300mm (12") Lead
SKU: MD31091R-300
VIEW PRODUCT


Admiral Pro 2200mAh 3S 11.1V 45C LiPo Battery with XT60 Connector
SKU: EPR22003PROX6
VIEW PRODUCT


Lemon 7-Channel DSMX Compatible Telemetry Receiver Gen 2.1 with Gyro Stabilization
SKU: LM0086VPX
VIEW PRODUCT


Freewing Pandora 4-in-1 Blue 1400mm (55") Wingspan - PNP
- Regular price
- €22900 (VAT inc.)
- Sale price
- €22900
- Regular price
- €000
- (Save €-229.00)
- Unit price
- /per
Adding product to your cart
Customer Reviews








- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Pandora plane
had one before and loved it. have not started on this one yet. Super fast service . everything looks great.
- How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
- How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
- How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
- How well does the product perform / function? Very WeakWeakOkayGoodVery Good
Very good
Great plane, use this as my trainer, and it lands and takes off very smoothly. Defiantly better than E-flight's trainers, because those have very unstable landing gear, a thin wire...read moreGreat plane, use this as my trainer, and it lands and takes off very smoothly. Defiantly better than E-flight's trainers, because those have very unstable landing gear, a thin wire can not hold up a plane. Happy over all, with no problems yet. Assembly was a little confusing, and I was missing the propeller spacer, but assembly is still do-able. Although I do wonder when Freewing will release a model of the Concorde, as I just built the Lego one yesterday.
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

Poor Instructions
The instructions appear to be written by someone learning the English language. The plane came with some missing hardware, and no outline where the parts go. Not easy making adjustments...read moreThe instructions appear to be written by someone learning the English language. The plane came with some missing hardware, and no outline where the parts go. Not easy making adjustments since you have to remove the wing to get to the receiver and servos. I have not set it up with the wing under so I don’t know what challenges that may require.
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

Pandora, Pandora, Pandora!
Absolutely wonderful plane, with 4 different configurations, solidly built and beautifully designed. Changing configurations can be done in minutes with a Phillips head screw driver. A great second plane that...read moreAbsolutely wonderful plane, with 4 different configurations, solidly built and beautifully designed. Changing configurations can be done in minutes with a Phillips head screw driver. A great second plane that will grow with your skills! Very Pleased!
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

The Pandora is a Winner!
Success!!! And the life of my Pandora 1400mm LWTD (low-wing taildragger) begins. Great flights this morning at Leslie Park, Ann Arbor, MI. The first two were on 3S 2200mAh and...read moreSuccess!!! And the life of my Pandora 1400mm LWTD (low-wing taildragger) begins. Great flights this morning at Leslie Park, Ann Arbor, MI. The first two were on 3S 2200mAh and I was able to get 5 - 6 minutes of flight time, the next two flights were on 4S 2200mAh and 7+ minutes was easy with time to spare. I installed an AR637T Rx & a 60amp Avian 3S-6S ESC. The Rx is set up with AS3x on and SAFE is disabled (this is the only plane in my hangar set-up without SAFE). I realized that I need to fly with more confidence in my flying skills. 1st) The Pandora took off easily from the packed ground at 55% throttle, rose evenly and well controlled at 60% throttle, as I increased throttle I noticed a wobble in the Ailerons, reduced throttle and landed easily in recently cut “ball field” grass. Reduced the GAIN on AS3x. Went through my rather long pre-flight check. 5min. 2nd) The Pandora took off as nicely as before flew level at 50% and controlled through the rest of the flight with no chatter in the ailerons at any speed. All of my flights were in low rates (75%t - 25%e). I was particularly interested in the roll rate in this low-wing tail dragged configuration and was quite impressed with it, considering how stable this plane flies. 5min. 3rd & 4th) Pandora took off as expected, quickly and smoothly, almost immediately you could feel the difference in power, really nice to know … JMO but this plane is meant to fly on 4S !!! And it flies with everything you could ask for and whole, whole lot more! Freewing has a real winner in the Pandora 4-1 1400mm in any configuration you prefer, but change out the ESC to 40amp or more that will handle 3S or 4S Back to the flights 3 & 4, I was even more impressed with this plane with every flight! 7min. 7.5min. Thank you for reading … comments are welcome … questions are welcome …
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

Deficiency
The elevator servo did not work and the rudder servo was jittery…….
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good
BenchCraft 300mm (12") Charge Lead with XT60 Connector
SKU: BCT5002-008
VIEW PRODUCT


SkyRC B6AC V2 50W 6 Cell (6S) AC/DC LiPo Battery Charger
SKU: SK-100008-01
VIEW PRODUCT


Futaba 6K-V3S 8-Channel Transmitter with R3008SB Receiver
SKU: FUTK6100
VIEW PRODUCT


Freewing 9g Digital Reverse Servo with 300mm (12") Lead
SKU: MD31091R-300
VIEW PRODUCT


Admiral Pro 2200mAh 3S 11.1V 45C LiPo Battery with XT60 Connector
SKU: EPR22003PROX6
VIEW PRODUCT


Lemon 7-Channel DSMX Compatible Telemetry Receiver Gen 2.1 with Gyro Stabilization
SKU: LM0086VPX
VIEW PRODUCT


-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support

Freewing Pandora 4-in-1 Blue 1400mm (55") Wingspan - PNP
ARF BUNDLE - ARF plus Electronics - $219.00
- Regular price
- €22900 (VAT inc.)
- Sale price
- €22900
- Regular price
- €000
- (Save €-229.00)
- Unit price
- /per

Hobby Squawk Community Forum
visit forum
RC Knowledge Blog
visit blog
Guidance & advice for beginners
Find out more